www.9778.com
DongGuan cnauto automation equipment Co Ltd
总监在线
13713306830
valve
position:home > valve

ZZ-3535 rotary ceramic dispensing valve

writer:点胶阀 time:2021-05-19 15:51 clicks:
ZZ-3535 Ceramic dispensing valve is a kind of glue that can use particles. It is manufactured in a special way. There is no special device inside, but the device is externalized. There is only one stirring propeller inside. Rotating push, just like cement mixer, conveys glue by rotating. The glue with particles will not wear out the internal parts and will last for a long time.Ceramic spotting valves are also known as rotary spotting valves.
陶瓷点胶阀
Machine parameters
 
Operating Viscosity: 1~3,000,000 CPS
 
Vomiting volume: 0.01ml
 
Operating pressure: 4-7kg/cm3
 
Feed pressure: <30kg
 
Operating frequency: <600min
 
Feed spout size: 1/8"npt(f)
 
Rubber outlet bore: 2.0mm
 
Flow regulation: micrometer precision fine-tuning device
陶瓷点胶阀
Rubber valve core: ceramic core
 
Shape size: (D) 35x (H) 97 (mm)
 
Weight: 400g
 
Control solenoid: 2-way 5-way/2-way 3-way available
 
Installation screw: M5 internal screw
 
Features and advantages
 
1. You can use granulated glue.
 
2. It still has good fluidity when using high viscosity glue.
 
3. The rotating device can replace the air pressure and push the glue, which is of great help.
 
4. Ceramic core is very difficult to wear and tear.
 
Suitable glue type
 
Granular glue, high viscosity silicone, sealant, black glue, yellow glue, lubricant, etc.
XML 地图 | Sitemap 地图