DongGuan cnauto automation equipment Co Ltd
position:home > valve
  • Dispensing valve controller

    field.writer/ :2020-07-11 Clicks:167

    The dispensing valve controller is combined with the dispensing valve, which can control dispensing parameters, such as air pressure input value, suction proportion value, glue delivery speed, voltage transmission, etc., which is a very important accessor...

  • Zz160 round silica gel valve

    field.writer/ :2020-07-10 Clicks:205

    This dispensing valve heel is manufactured in a plunger way, which can solve the problem of high viscosity glue coating. Since high viscosity will affect the glue delivery, glue with corresponding viscosity should be used to realize dispensing task. Two t...

  • Zz-1050r hot melt adhesive precision screw valve

    field.writer/ :2020-07-04 Clicks:187

    Hot melt glue screw valve is a kind of glue dispensing valve that can be heated. In view of the high-precision dispensing demand that ordinary dispensing valve can not complete, this hot-melt glue screw valve can solve the requirements of glue heating and...

  • Super flow two component screw pump zz-700d

    field.writer/ :2020-07-03 Clicks:222

    With the improvement of industrial technology, there are more types of dispensing valves. Basically, the viscosity of glue for each gradient can be matched with a dispensing valve, and some are specially designed for two-component glue. In the past, there...

  • High speed injection valve zz-05q

    field.writer/ :2020-07-02 Clicks:176

    If the paint on the watch case is painted, it is related to the glue dispensing valve, called high-speed spray valve, zz-o5q. It has good glue spraying technology and can achieve micro spray effect. It can fundamentally solve the accuracy and speed requir...

  • Red glue dispensing valve

    field.writer/ :2020-06-28 Clicks:132

    Red glue is a conventional type of glue, which is mainly used in circuit board dispensing. However, special dispensing valve is required due to the characteristics of glue. Our company has developed and manufactured a dispensing valve that meets the requi...

  • Power filling valve

    field.writer/ :2020-06-23 Clicks:163

    Brief introduction: a power supply glue filling valve is made to meet the glue demand of power supply glue filling, which is specially designed to meet the two-component power supply glue filling valve. Its function is to control the effect. According to ...

  • Installation steps of mixing pressure barrel

    field.writer/ :2020-06-12 Clicks:160

    In order to ensure that the pressure bucket can be transported to the customer's hands without being damaged, it is generally not equipped with accessories to avoid being hit and crooked. Many customers will not be able to assemble the pressure bucket aft...

XML 地图 | Sitemap 地图