Most of the production of filling or dispensing need continuous supply of glue when heating pressure barrel is used to assist production. The external pressure barrel connector is a small component, which is often neglected because of its small structure and non-prominent importance. In fact, the connector plays an important role that can not be ignored. The stability of glue supply for glove dispensing and charger filling will be connected by pressure barrel. Part of the impact of the joint, the specific extent of the impact will be briefly described below.
Pressure barrel M21 adapter
Description of Connectors with Firm Connections
The role of pressure barrel connectors will be briefly described here. At present, glove dispensing or charger filling in continuous production needs stable feeding efficiency through heating pressure barrel. The pressure barrel connectors at the outer end of barrel mainly bear the strong connection of transport interfaces between air pressures. The stable connection quality is not easy to leak and promotes stable and sustained feeding effect so as to heat up. Pressure barrel can provide a stable amount of glue for a long time, which can be used in glove dispensing and charger filling for a long time. Pressure barrel automatic dispensing machine refers to the automatic dispensing machine with pressure barrel for continuous feeding. This configuration has a positive role in promoting the use efficiency of the link requiring continuous and stable dispensing.
Semiautomatic Rubber Pressure Barrel
Impacts of unstable connectors
When operating the heating pressure barrel, it is necessary to check the firmness and sealing of the joint of the pressure barrel. Otherwise, air leakage or rubber leakage may occur, which will affect the quality and effect of the supply of the heating pressure barrel. At present, it seems that there are many problems, such as air leakage. It is necessary to check whether the joint is firm or not and whether it leaks due to partial wear and tear. The matching pressure barrel automatic dispensing machine is used for gloves. The stability and efficiency of production line operations requiring continuous feeding, such as dispensing and charging, will be greatly reduced.
Fully automatic three-axis dispensing machine
Most of the pressure barrel connectors connect the barrel body with the air supply port, so this part of the structure is often prone to air leakage and affect the size of the glue supply force. In order to ensure the stable use of the pressure barrel automatic dispensing machine, it is necessary to check whether the connectors and other similar accessories can be put into normal production and use.