DongGuan cnauto automation equipment Co Ltd
position:home > news

Take you to know about dispensing syringes

writer:点胶设备 time:2019-08-31 11:06 clicks:
With the rapid development of the dispensing industry and the increasing diversification of dispensing machines, dispensing syringes as dispensing accessories in dispensing machines play an important role in the dispensing process, so how to configure dispensing syringes?
Two-component rubber cylinder
At present, the sizes of plastic dispensing syringes commonly used in dispensing machines are 30cc, 55cc, 100cc and 200cc respectively. After determining the sizes of plastic dispensing syringes, dispensing controllers and adapters are selected. The main functions of dispensing controllers are to provide air pressure and reverse suction to prevent glue leakage and distribution. The adapter is used to provide a pneumatic conveying pipe and a combined distributor syringe. After the dispensing syringe is of plastic type, the dispensing adapter is installed, the reverse absorption function of the dispensing adapter is opened to prevent the dropping of glue, and then the pressure barrel is fed by dispensing machine.
Stainless steel glue-coated needle barrel
The types of dispensing needle barrels are mainly divided into single liquid and double liquid. The single liquid dispensing needle barrel has no loose edge, no inclination, no bubbles, and the inner wall is closely matched with the piston to ensure smooth drainage, no drip leakage, no cracking of the reinforced inert polypropylene material wall, and it is not easy to produce chemical products. The piston is made of polypropylene material to ensure the dispensing. The type of dispensing syringe is precisely matched, no liquid residue and suitable for most liquids.
AB dispensing syringe is mainly used for packaging and dripping of double liquid glue. It is light, beautiful, sealed and durable, flexible in glue quantity control and easy to store after use. 50ML series AB glue can be controlled at will. The suitable mixing ratio is 1:1 and 2:1
Needle adapter
The dispensing syringe can be equipped with 300 ml large capacity to be suitable for large dispensing occasions. It can be directly used for dispensing syringes to reduce dispensing times and improve operation efficiency. The dispensing is clean when used, and the feeding nozzles and pressure regulating devices are added when feeding. The feeding is very convenient, and the glue water level can be observed intuitively. It is suitable for all kinds of glue dispensing. Water,
XML 地图 | Sitemap 地图