DongGuan cnauto automation equipment Co Ltd
position:home > news

How to make a qualified pressure bucket

writer:xiaoliu time:2018-01-24 09:50 clicks:
The pressure barrel manufacturing requires not only technical, also need good material, two kinds of indispensable, at present for the production of the machine are selected as the most suitable choice of stainless steel, has good hardness, but also has anticorrosive function, which can satisfy to the pressure barrel pulse air pressure there will be no burst problems, let safety the barrel pressure becomes higher, the production pressure barrel is suitable, stainless steel can not be a lack of material.
The pressure barrel making qualified need something more to pneumatic spray pressure tank as an example, a qualified pressure barrel, also need to speed motor, stainless steel heating bag, side sensor, electric mixer and so on, these are making a good use of the pressure barrel accessories, pneumatic spray pressure barrel can manual or automatic mode, which is the use of advanced fittings made of high-tech products.
The pressure barrel manufacturing qualified also need to be equipped with a lot of things, the details of the local production is not to have the mistake, high-end equipment, pay particular attention to the details, otherwise easily lead to more problems, the details determine the quality of the products, this is the time after approval, no matter what a good product, manufacturing the process will need very careful, otherwise is unable to complete the function of the pressure barrel.
The pressure barrel qualified to see not only the manufacturing process, or to see the quality of the materials used, both are very important, can not have a little careless, if the pressure barrel problems, for the corporate brand will also be affected, no need to do that thing, for both are not no good manufacturing the pressure barrel with other equipment is the same reason, we should take seriously, this is the pressure barrel made of qualified.
XML 地图 | Sitemap 地图