DongGuan cnauto automation equipment Co Ltd
position:home > news

Teflon dispensing needle selected material production

writer:xiaoliu time:2018-02-01 10:09 clicks:
As in the process of dispensing needle dispensing equipment for fluid to drain to the specified location and improve the precision of dispensing dispensing accessories, are often used in the industrial production, due to a dispensing needle dispensing equipment accessories as special, which is different from other parts in dispensing accessories. The parts are known for dispensing supplies in the industrial production, is known as the material, the main reason is that the parts in the dispensing process is mostly disposable, because in the dispensing process the parts due to many reasons lead to various common problems often occur clogging, drawing, tailing. And these problems can not be avoided, only through some ways to get the link or reduce.
Therefore, based on the above reasons, the dispensing needle manufacturers usually start with considering the price performance ratio and minimize the price as far as possible, so as to reduce the production cost of dispensing equipment manufacturers. But with the increasing demand of production, the special needs of the industrial production, will be applied to different types of glue as adhesive products, because each kind of glue properties are different, so in the dispensing process of needle selection will be different, which is why Teflon dispensing needle can be applied to many in the production of different industries.
Teflon dispensing needle as a dispensing needle with many types of them, which is mainly applied to high precision dispensing products, and the product of the glue viscosity requirements are relatively low, so the selected Teflon dispensing needle material for manufacturers is very important problem.
The Teflon dispensing needle production material is actually very simple, is the main part of the steel pipe and plastic and collocation.
XML 地图 | Sitemap 地图